System
Management
1 x Micro USB 2.0 port for system configuration
Software Utility
Windows
©
Based Utility
Remote
Management
Remote Configure by Modbus RTU/ Read/Write Command
I/O Interface
Antenna Connector
1x 50 ohm, Female SMA
Serial Interface
2
-
wires RS
-
485 Terminal Connector with 1kv isolation
Connector Type: Removable Terminal Connector
Supported Model: LM
-
100 (Slave), LC
-
100(Host)
Serial Parameters
Baud Rate: 1200bps,2400bps, 4800bps, 9600bps
Data Bits: 8
Parity Check: None, Even, Odd
Stop Bit: 1,2
Current Input
2 Channels
Detection Range: 4
-
20mA
Accuracy Level: 0.3%
Voltage Input
2 Channels
Detection Range: 0~10 V
Accuracy Level: 0.2%
Current Output
1 Channel
Output Range: 4
-
20mA @ Typical 24V Power Input
Accuracy Level: 0.3%
Voltage Output
1 Channel
Output Range: 0.03~10V
Output Type: Open Collect (O.C.) / Push
-
Pull (Internal Jumper setting)
-
Accuracy Level: 0.2%, Full Scale (F.S.)
PWM Output
Frequency: 100Hz~1KHz with 0.2% Duty
-
Cycle Accuracy
Output Type
-
1: 5V, 200mA (Max)
Output Type
-
2: Open Collect (O.C.), 10V /200mA (Max)
System Indication
LED
Power (On): System Power applied
LoRa (Blinking): LoRa RF Signal on Communication
Power Requirement
Input Rating
Typical DC 24V, Rating: 10~30V
3
-
Pins Removable Terminal Connector for V+ ,Com and Earth Ground
Reverse Protection
Yes
Power
LM100/LM200: 1 Watt @ DC 24V power input
