WOLTURNUS Rex 350, Руководство пользователя

Страница: 27 / 36

Wolturnus Rex 350 User’s Manual 2019 Power Wheelchair
Troubleshooting
The fault display is via the flashing LED indicator ”Battery gauge” on the control panel. Table 1 explains the indi-
vidual codes with associated error sources as well as possible causes and measures.
If the errors cannot be completely remedied by the measures described, the authorized dealer is able to read
the exact error code and perform a more detailed system analysis with the hand-held programmer.
All faults that have occurred are stored in a list and can be read out by a main inspection of the electric wheel-
chair. Based on the saved data, additional service and maintenance intervals can be planned.
9.1 Warning
A warning indicates the status or malfunction of one or more components. Components without errors are not
limited in their function.
9.2 Error
In case of communication problems in the control bus system, the system triggers an emergency stop to avoid
uncontrolled functions. The wheelchair can be driven out of a danger zone, for example by means of the control
again. road traffic.
If the wheelchair is not ready for operation after switching on, the push function can be set by loosening the
brake (see chapter 6.4). Contact Wolturnus A / S immediately after an emergency stop!
Malfunction of the steering:
The control shows a fault signal on the control panel when the brake is released and the joystick is operated. If
this is not the case, a malfunction exists which must be remedied immediately by an authorized dealer.
An error can affect one or more of the electric wheelchair’s functions. Until the fault is rectified, the system is
not fully operational.
Risk of injury due to abrupt stop of the electric wheelchair.
WARNING!
Risk of accidents due to uncontrolled driving behavior:
When operating the electric wheelchair, uncontrolled movements may occur due to interference. In this
case, contact Wolturnus A / S immediately..
WARNING!
27