WOLTURNUS Rex 350, Руководство пользователя

Страница: 19 / 36

Wolturnus Rex 350 User’s Manual 2019 Power Wheelchair
Adjustment and set-up
6.6 Adjusting footrest height
• Use a 3 mm Allen key and an 8 mm wrench to loosen and remove both nuts at the back of the fore-frame
(image 11).
• Remove the bolt so that the footrest can freely slide within the fore-frame tube.
• Raise or lower the footrest to the desired height, making sure that the holes in the footrest and the front-
frame are aligned. Make sure that the footrest is not lopsided (image 11).
• Mount the clamps and nuts and tighten them (Tension 4 Nm/3,0 ft.lbf/35 in.lbf). If tightened too much, the
frame could bend.
6.7 Adjusting footrest angle
• Use a 4 mm Allen key and 10 mm single-head wrench to loosen the nuts on the bracket underneath the foot
plate (image 12).
• Turn the foot plate until it is at the desired angle (image 12).
• Tighten the nuts.
Image 11 Loosen the bracket bolts
Image 12 Loosen bolts
19