8
Long press the CTRL button again, the Matrix enters the EDID SET mode.
As shown below: defaulted as Automatic Read Mode (Mix Mode).
Figure 9.
EDID Automatic Read Mode
When the matrix enters the EDID SET mode, The EDID 1 to EDID 7
corresponds to 7 different EDID modes respectively, and can be selected
by the Input buttons. PORT numbers corresponds to the Input Port that
needs to set, and can be selected by the Output buttons. After selecting
EDID mode and PORT, press ENTER button to confirm the selection.
Below are 7 types of EDID modes:
1
Mix Mode
Press the Input button 1 to select Mix Mode (Automatic Read EDID
Mode). As shown below:
Figure 10.
EDID 1 Mix Mode
2
Copy Mode
Press the Input button 2 to select Copy Mode. In this mode, by
default, the matrix reads the EDID information of the Sink connected
to a single Output Channel in a sequence from Port 1 to Port 8 till it
detects the first valid EDID information, and send it to the Inputs. As
shown below:
