Figure 6
Figure 7
Lower
Basket
Receptacle
Upper
Basket
Receptacle
Using Your Deep Fryer
1
When the unit is first plugged in, the blue Power Indicator Light will
illuminate indicating that your Deep Fryer is in standby mode.
2
Press and hold the Power Button for approximately 3 seconds until
you hear 2 beeps. The Timer Display will show 00. The temperature
selection will default to 375.
3
Press the Temp Button to cycle through the four temperature settings.
The Temperature Indicator Light for the selected temperature will
blink.
4
After your selections are made within approximately 5 seconds the
Deep Fryer will begin preheating the oil to the selected temperature.
The Temperature Indicator Light will continue to blink until the set
temperature is reached, at which point the Temperature Indicator
Light will remain steady and the Deep Fryer will sound 5 beeps. You
can now set the timer to set the desired time. If you do not set a time
the Timer Display will continue to blink for 3 minutes.
Note:
The countdown timer does not turn your Deep Fryer off when
the set time has elapsed, it is simply a timer with an audible beep. This
feature allows you to do continuous batches without having to reset
the oil temperature each time.
Note:
The temperature settings can be adjusted at any time
during the preheat or cooking process. If you change the cooking
temperature to a higher temperature once the preheat or cooking
process has started, the new higher Temperature Indicator Light will
blink until the set temperature has been reached. The timer can only
be set or adjusted once the Deep Fryer has finished the preheating
cycle.
If you change to a lower temperature the Temperature Indicator
Light will remain steady. The Timer will
beep
multiple
times and
the Timer Display will
blink 00
fo
r 3 minutes or until the time is set.
5
Place your food into the Frying Basket ensuring that you do not
exceed 3/4 full.
6
The Deep Fryer will maintain the temperature displayed as long as the
Deep Fryer is plugged in and the Temperature Indicator Light remains
on.
7
When the cooking process is complete, remove the Lid and place the
Frying Basket in the elevated position (see Figure 6) so that excess oil
can drain into the Oil Pot.
8
When all frying is compete turn your Deep Fryer off by pressing and
holding the Power Button in for 3 seconds until all lights except the
Power Indicator Light turn off. Unplug the Power Cord from the wall
outlet.
Assembling Your Deep Fryer
Basket
Squeeze the flexible steel handle
together (Figure 6) and place the two
ends of the handle into the holes of the
Lower Basket Receptacle, place the
stem of the handle behind the Upper
Basket Receptacle (Figure 7) then
release pressure on handle frame.
12
13