32
03/2009
6. Before stopping the machine at the end of the forward movement, pull the soft lowering
lever ( 2 ) to lift the sanding roller from the floor.
7. Every forward sanding is followed by a backward sanding in the same lane.
For the next forward sanding, offset the machine about 10 cm to the right.
Caution!
In no event shall the machine come to a standstill while sanding, not even for a
short moment as this would sand a dent into the floor. Make sure to always raise
the sanding roller while the machine is still in a constant movement before you
change directions.
Lower the sanding roller only when the machine is in constant movement again.
2
