5
Starting the machine
5.1
Mounting the handle
Note!
The Cobra is delivered with handle and dust pipe dismantled.
Caution!
There is the risk of injury or damage caused by an unintentional starting of the machine.
Disconnect the machine from the mains supply before working on the machine!
How to mount the handle:
1. Insert the bottom part of the connecting rod through the slot of the handle mount.
Make sure that the fixing studs ( 1 ) are inserted into the positioning holes ( 2 ).
2. Tighten the star-shaped knob ( 3 ).
3. Check the position number of the handle.
4. Insert the stud ( 4 ) on the rod into the corresponding hole ( 5 ).
5. The clamp sleeve ( 6 ) firmly fixes the two parts of the connecting rod.
9
03/2009
1
4
2
6
5
3
1
