![background image](http://html.mh-extra.com/html/wolff/085000/085000_original-instruction_993413022.webp)
22
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
EN
9.0 Notes on various floor coverings
Operating instructions
► Do not load the power tool in such a way that
I'm very strong that it's coming to a standstill.
The main application area of the BITURBO-STRIP-
PER is the removal of linoleum, PVC, rubber, cork,
design and CV coverings, as well as needle fleece
and carpets.
Solid parquet, multilayer parquet and flexplates
can also be removed to some extent.
► Needle-punched floor covering, carpet, PVC…..
The coverings to be removed should be pre-cut in
blade-widths (fig. E) and then removed with the
stripper in one step. In many cases, the glue can
also be removed at the same time.
► Coverings without a foam backing:
Prior to performing the stripping work, pre-cut the
strips in blade-widths (fig. E). Regularly check
whether the blade is still straight and sharp.
► Coverings with a foam backing:
Only use sharp blades! Remove the large sections
of the wearing surface. Use a carpet pulling claw for
this.
Then remove the foam residue with the stripper. If
there is some foam in the recess, approach from
the side.
► Coverings with a fleece backing:
Do not remove the wearing surface beforehand. Cut
the covering into strips and strip them together with
the fleece backing.
► Semi-flexible tiles:
Provided they are not extremely flexible, semiflexible -
tiles can be removed without pre-cutting them.
► Parquet
Before stripping, saw in the width of the blade at right
angles to the laying direction. Depending on the bon-
ding, it may be necessary to saw in several times.
► With U-blades, the pre-cutting step in not necessary
for many flexible coverings, the coverings must be
checked on-site.If the tyre wear is highly visible on
the surface, the U-blade should not be used.
► We recommend using flat blades of varying lengths
and widths for flexible, elastic floor coverings. The
harder the covering, the thicker the blade should be.
► The blade is generally inserted with the blade edge
up, unless it works itself too deep in the surface. In
this case, the blade must be inserted with the blade
edge down.
► The heavy-duty special blades are generally suitable
for hard coverings, such as parquet or ceramic tiles.
Änderungen vorbehalten.
10.0 Guarantee
The warranty period for new Wolff machines is one year
from the date of handover / delivery to the customer, un-
less mandatory statutory provisions stipulate otherwise.
When asserting warranty claims, the invoice or proof of
purchase must also be presented.
All repairs within the scope of the warranty must be
carried out by a Wolff service workshop recognised by
us. Self-performed and/or improper repairs regularly lead
to the exclusion of warranty claims. This also applies to
improper operation and/or use.
Replacement of parts, accessories and other modifica
-
tions to Wolff machines
Wolff machines offer the user a high degree of safety and
reliability. In order to maintain this, the factory condition
of your Wolff machine at the time of delivery must not be
changed without observing the following rules. These rules
apply to the replacement of parts, the equipment with
accessories as well as other technical changes.
Any work on your Wolff machine must be carried out
exclusively by a specialist workshop which has appro-
priately trained and experienced personnel as well as
the necessary work equipment. We recommend
authorized Wolff service workshops.