![background image](http://html.mh-extra.com/html/wolff/085000/085000_original-instruction_993413015.webp)
15
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
Restriction of use
The BiTurbo-Stripper is designed exclusively for removing
glued, elastic floor coverings in dry rooms.
It should not be used for any other purpose. Wolff GmbH &
Co.KG cannot be held responsible for any damage or loss
caused by incorrect use.
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standardiza-
tion documents:
DIN EN 1037, EN ISO 12100, DIN EN 62841-1, DIN EN
61800-3, according to the provisions of the: 2006/42/EG,
2014/35/EU, 2014/30/EU. Electrical Safety Act 2002.
Dipl.-Ing. (FH) Dieter Hammel Authorised to
issue this declaration and for the gathering of
the technical documentation.
08.02.2018 i.V.
WOLFF GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1
Technical data
Power supply……………………....... 230V/115V/100V AC
Frequency……………………………………………...50 Hz
Power consumption ………….…. ..................3000W/16A
Stroke rate…................…………………….3.000 slag/min
Weight total………………………………………...... 260 kg
Weight percussion....................................................55 kg
Weight drive............................................................. 90 kg
Weight stalk..............................................................14 kg
Additional weight forwards…………..………….. 2 x 24 kg
Additional weight backwards…………..………... 4 x 13 kg
Blade's width……………………………………….. 350 mm
Speed…………………………….…………....... 0-27 m/min
Includes:
1 BiTurbo
1 knife 350x60x1 mm
1 knife 350x60x1,5 mm
1 knife 350x120x1,5 mm
1 special knife U 350x90° top
1 special knife U 350x90° below
1 parquet knife 200x120x3
1 blade guard 350 mm
EN
2.0 Safety Warnings
2.1 General Power Tool Safety Warnings
Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmosphe-
res, such as in the presence of flammable liquids,
gases or dust.
Power tools create sparks which may ignite the Dust
or fumes.
c) Keep children and bystanders away while opera-
ting a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrige-
rators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditi-
ons.
1 Hearing protection
1 two-hand grease gun
1 grease cartridge
1 set of tools
1 pair of gloves
1 Instruction manual
1 round sling