background image

19

C O N T A C T
I N F O R M A T I O N

Wolf Customer
Service:
800-332-9513

Website:
wolfappliance.com

T R O U B L E

S H O O T I N G

IMPORTANT NOTE: If the warming drawer
does not operate properly, follow these
troubleshooting steps:

Verify that power is being supplied to the
warming drawer.

Check electrical connections to ensure that
the installation has been completed
correctly.

Refer to the Troubleshooting Guide in the
Wolf Warming Drawer Use & Care
Information.

If the warming drawer still does not work,
contact a Wolf authorized service center. Do
not attempt to repair the warming drawer
yourself. Wolf is not responsible for service
required to correct a faulty installation.

I F   Y O U   N E E D  

S E RV I C E  

Maintain the quality built into your warming
drawer by calling a Wolf authorized service
center.

For the name and number of the Wolf
authorized service center nearest you,
check the Locator section of our website,
wolfappliance.com, or call Wolf Customer
Service at 800-332-9513.

When calling for service, you will need the
model and serial numbers of the warming
drawer. Both numbers are listed on the
product rating plate, located on the left
front floor area of the inner cabinet. To
access the rating plate, the drawer must
be fully open. Refer to the illustration on
page 3.

I N S TA L L AT I O N

I N S T R U C T I O N S

The information and images are the copyright
property of Wolf Appliance Company, LLC, an
affiliate of Sub-Zero Freezer Company, Inc.
Neither this book nor any information or images
contained herein may be copied or used in whole
or in part without the express written permission
of Wolf Appliance Company, LLC, an affiliate of
Sub-Zero Freezer Company, Inc.

©Wolf Appliance Company, LLC all rights reserved.

Содержание WWD30





















Отзывы: