Wolf Rangetop Скачать руководство пользователя страница 6

Страница: 6 / 29

Remove the Wok Spacer Rail

Lift the wok spacer rail directly upward from the supports in
the burner box.

WOK SPACER RAIL INSTALLATION

Install the Wok Spacer Rail

Set the wok spacer rail onto the supports in the burner box,
positioned so that its screw holes will align with the screw
holes in the wok frame.

SOLENOID REMOVAL

To remove the solenoid, first remove:

Remove the Solenoid

Disconnect the solenoid wire connectors.

Use a

" combination wrench to disconnect the solenoid

inlet line.

Use a

" combination wrench to disconnect the solenoid

outlet line.

Remove the solenoid from the unit.

SOLENOID INSTALLATION

After installing the solenoid, install:

Install the Solenoid

Place the solenoid into the unit.

Use a

" combination wrench to connect the solenoid

outlet line.

Use a

" combination wrench to connect the solenoid inlet

line.

Connect the solenoid wire connectors.

WOK BURNER ASSEMBLY REMOVAL

To remove the wok burner assembly, first remove:

Flat wok grate

Wok grate

Wok top plate

Remove the Wok Burner Assembly

Lift the wok burner assembly directly upward from the tray.

Sealed Burner Rangetop with Wok Service Manual

Component Removal and Installation

Remove the Wok Spacer Rail (continued)

service.subzero.com

828990 REV. A

Содержание Rangetop






























Результаты поиска

Содержание Rangetop

Отзывы:

Бренды по названию

Популярные бренды

Wolf Rangetop, Руководство по обслуживанию

Результаты поиска

Содержание Rangetop

Отзывы:

Бренды по названию

Популярные бренды