Wolf Rangetop Скачать руководство пользователя страница 25

GAS PRESSURE TESTING

Testing gas supply pressure to a unit is a critical tool in properly
diagnosing a problem. Gas supply pressure issues are
common, and many times they are the root cause of recurring
issues. On SRT units, each burner has an individual spark
module. There are no fuel-to-air ratio adjustments. Intermittent
sparking issues, flame quality issues, and ignition issues that
affect all burners are almost always related to gas pressure or
the supply regulator. Because there are also three different sizes
of burner assemblies on each unit, pressure issues can affect
different sizes of burners in different ways. Check gas pressure
using only the method listed, so that the recorded pressures
can help diagnose a specific issue.

Natural Gas Specifications

The supply pressure to the inlet of the unit regulator must be

between a minimum of 7” water column (wc) and a maximum of

14” wc.
The outlet of the regulator must be 5” +.5" wc/-0.0" wc.
The maximum pressure drop from maximum flow to low flow

must be less than .5” wc.

Liquid Propane Specifications

The supply pressure to the inlet of the unit regulator must be

between a minimum of 11” wc and a maximum of 14” wc. The

outlet of the regulator must be 10” +.5" wc/-0.0" wc.
The maximum pressure drop from maximum flow to low flow

must be less than .5” wc.

Connecting to the Unit Manifold

To check pressure on a SRT unit:
1

Uninstall the unit.

2

Remove the burner pan.

3

Assemble the burners.

  WARNING

Do not over-tighten the burner assembly

screws. The burner is designed to have the

burner pan between the burner assembly and

the orifice holder. A small amount of gas

leakage is normal during testing.

4

Disconnect the main gas tube from a 9.2K orifice holder,

and connect the manometer to the main gas tube. Set the

burner to High.

Static Pressure

Static pressure is the gas pressure when there is no gas

movement. Taking this pressure is not an effective diagnostic

tool. Pressure will equalize across any regulator in the gas

supply system. It is not possible to determine necessary

pressures when checking any part of the unit by static pressure.

Low Flow Pressure

Low flow pressure is manifold pressure on the unit taken when

there is minimum gas flow. This pressure will provide an idea if

the unit regulator is operating properly. Low flow pressure must
be within 

PLUS

 .5” wc and 

MINUS

 0.0” wc of the

designated manifold pressure. To find the low flow pressure on

SRT units, light one of the 9.2K burners in the simmer range,

while connected to the other 9.2K burner main gas line.

Example:

 Low flow manifold pressure reading taken on a

SRT unit's 9.2K burner using natural gas was 5.4” wc. Low flow

pressure is good. It falls in range of 5” wc - 5.5" wc.

Example:

 Low flow manifold pressure reading taken with

right front burner on low simmer on a SRT unit with liquid

propane (LP) was 9.7” wc. Low flow pressure is bad. Outside of

range of 10” wc - 10.5" wc.

Maximum Flow Pressure

Maximum flow pressure is the manifold pressure when all

burners are on the High setting. It is normal for the pressure to

drop slightly. The difference in pressure from the low flow

pressure to the maximum flow pressure must be less than .5”

wc.

Example:

 Low flow manifold pressure is 5.4” wc on a SRT

unit. Maximum flow manifold pressure is 5.2” wc. Pressure test

is good. Pressure drop was 0.2” wc, and low flow was 5.4” wc.

Unit is not experiencing a gas pressure issue.

Example:

 Low flow pressure is 10” wc on a SRT unit after

the gas company raised the supply pressure. Maximum flow

pressure is 9.5” wc. Pressure drop is .5” wc. Unit fails pressure

test.

Common Reasons for Pressure Issues

Most often, an insufficient volume of gas is the cause of an

excessive drop in pressure between low flow and maximum

flow. Make sure the following items are to specification:

If a flex-line is present, it must be at least 

1

/

2

" internal

diameter (ID) and no longer than 3 feet long. Many times,

the line is 

1

/

2

" OD.

Shut-off valve should be 

3

/

4

". Most of the 

1

/

2

" shut-off ball

valves are 

3

/

8

" through the ball.

Make sure the supply pressure stays at or above the

minimum supply pressure at full load. Full load is when all

gas appliances in the home are on including the rangetop.

Supply line to the unit is not 

3

/

4

".

Note: If the customer has multiple issues, correct the flex-line

and shut-off first before requesting that the customer replace

the gas line.

UNINSTALL THE UNIT

1

Turn off the power to the unit.

2

Remove the unit from the installation.

Sealed Burner Rangetop with Wok Service

Manual

Troubleshooting Guide

Gas Pressure Testing (continued)

service.subzero.com

828990 REV. A     

25

 

Содержание Rangetop






























Отзывы: