Drawer Microwave Oven Care
24
INTERIOR
Cleaning is easy because little heat is generated to the
interior surfaces; therefore, there is no baking and setting
of spills or spatters. To clean the interior surfaces, includ-
ing drawer sealing surfaces, wipe with a soft damp cloth.
Do not use abrasive or harsh cleaners or scouring pads.
For heavier soil, use baking soda or a mild soap; rinse
thoroughly with hot water. Do not use chemical oven
cleaners.
DRAWER GUIDES
Remove the food crumbs from the drawer guides. Wipe
with a soft dry cloth in order to keep the drawer
microwave opening and closing smoothly.
ODOR REMOVAL
Occasionally, a cooking odor may remain in the microwave
oven. To remove, combine 1 cup
(240 ml)
water, grated
peel and juice of one lemon and several whole cloves in a
2-cup
(480 ml)
glass measuring cup. Boil for several
minutes using 100% power. Leave in the oven until cool.
Wipe the interior with a soft cloth.
Cleaning and Care
STAINLESS STEEL SURFACES
The exterior should be wiped often with a soft damp cloth
and polished with a soft dry cloth to maintain its beauty.
There are also a variety of products designed especially for
cleaning and shining the stainless exterior of the oven.
We recommend that the cleaner be applied to a soft cloth
and then carefully wiped over the stainless steel trim,
rather than applied directly to it. Follow package directions.
FRONT SIDE OF THE DRAWER
Wipe the window on both sides with a soft damp cloth to
remove any spills or spatters. Metal parts will be easier to
maintain if wiped frequently with a soft damp cloth. Avoid
the use of spray and other harsh cleaners as they may
stain, streak or dull the drawer surface.
CONTROL PANEL
Care should be taken in cleaning the touch control panel.
If the control panel becomes soiled, the touch pads may
be deactivated before cleaning. Refer to control panel lock
on page 9. Wipe the panel with a cloth dampened slightly
with water only. Dry with a soft cloth. Do not scrub or use
chemical cleaners. Close drawer and turn control lock off.
Touch STOP/CLEAR.
The waveguide cover, located on the inside top of the
microwave interior, is made from mica, so it requires
special care. Keep the waveguide cover clean to assure
good microwave performance. Carefully wipe with a
soft damp cloth any food spatters from the surface of
the cover immediately after they occur. Built-up spatters
may overheat and cause smoke or possibly catch fire.
Do not remove the waveguide cover.
All manuals and user guides at all-guides.com