Wolf DO30F, Руководство по конструкции

Страница: 25 / 114

Wolf Warming Drawers
25
wolfappliance.com/specs
ELECTRICAL REQUIREMENTS
The warming drawer requires a separate, grounded 120 V
AC, 60 Hz power supply. The service should have its own
15 or 20 amp circuit breaker, and a grounded 3-prong
receptacle should be located within reach of the power
cord and flush with the back wall.
Planning Information
The warming drawer must be installed with a Wolf
stainless steel or integrated drawer front available through
your authorized Wolf dealer. For local dealer information,
visit the find a showroom section of our website,
wolfappliance.com. Specific installation instructions are
included with the drawer front.
For all installations, the warming drawer must be fully
enclosed, top and bottom.
The warming drawer platform must be able to support
200 lbs (91 kg). The platform must be a minimum of 1" (25)
above the toe kick to allow for the warming drawer trim
which overlaps
5
/
8
" (16) on all four sides.
The warming drawer with E series drawer front can be
installed in a standard, recessed or flush inset application.
For a standard installation, the drawer collar and front
panel sit proud of the cabinet face frame. A recessed
installation requires the cabinetry be recessed by
3
/
16
" (5)
so the collar is flush with the cabinet face frame but the
drawer front will sit proud. A flush inset installation
requires the drawer collar and front panel be recessed to
be flush with surrounding cabinetry. Refer to illustrations
on the following pages for minimum cabinet dimensions
for your specific installation.