Wolf CT15I Скачать руководство пользователя | Manualshive

Страница: 4 / 62

background image

Induction Cooktop

General Information

1-2

INTRODUCTION

This Wolf Induction Cooktop Technical Service Manual, Part #809094, has been compiled to provide the most recent
technical service information about the Wolf Induction Cooktops. This information will enable the service technician
to troubleshoot and diagnose malfunctions, perform necessary repairs and return a Wolf Induction Cooktop to proper
operational condition.

The service technician should read the complete instructions contained in this Service Manual before initiating any
repairs on a Wolf Appliance.

IMPORTANT SAFETY INFORMATION

Below are the Product Safety Labels used in this manual.

The “Signal Words” used are

WARNING

&

CAUTION

.

Please note that these safety labels are placed in areas
where awareness of personal safety and product safety
should be taken and lists the precautions to be taken when
the signal word is observed.

Indicates that hazardous or unsafe practices
could result in severe personal injury or death

Indicates that hazardous or unsafe practices
could result in minor personal injury or product
and/or property damage

In addition, please pay attention to the signal
word “

NOTE

”, which highlights especially

important information within each section.

TECHNICAL ASSISTANCE

If you should have any questions regarding a Wolf
appliance and/or this manual, please contact:

Wolf Appliance, Inc.

ATTN.: Service Department

P.O. Box 44988

Madison, WI 53744-4988

Customer Service

Phone #: (800) 332 - 9513

Technical Assistance

Phone #: (800) 919 - 8324

Parts / Warranty Claims

Phone #: (800) 332 - 9513

Customer Service E-mail Address

[email protected]

Customer Service & Technical Assistance

Facsimile #: (608) 441 - 5887

Parts / Warranty Claims

Facsimile #: (608) 441 - 5886

Offi ce Hours:

7:00 AM to 7:00 PM Central Standard Time

Monday through Friday

This manual is designed to be used by Authorized Service Personnel only. Wolf Appliance, Inc.
assumes no responsibility for any repairs made to Wolf appliances by anyone other than Authorized
Service Technicians.

The information and images are the copyright property of Wolf Appliance, Inc., an affi liate of Sub-Zero, Inc. Neither this

manual nor any information or images contained herein may be copied or used in whole or in part without the express

written permission of Wolf Appliance, Inc., an affi liate of Sub-Zero, Inc. © Wolf Appliance, Inc., all rights reserved.

«
...
2
3
4
5
6
...
»

Содержание CT15I































































Отзывы:

Нет отзывов

Похожие инструкции для CT15I

Бренд: V-ZUG Страницы: 88

Monogram ZGU48N6RWSS

Бренд: GE Страницы: 4

Бренд: Everdure Страницы: 13

Бренд: K&H Страницы: 33

Бренд: FG Europe Страницы: 23

Бренд: Dacor Страницы: 23

Бренд: Frigidaire Страницы: 40

Бренд: Whirlpool Страницы: 20

Бренд: Faber Страницы: 3

Бренд: Russell Hobbs Страницы: 20

Бренд: Lynx Страницы: 32

IMMERSION SOUS VIDE PRO 15L

Бренд: OBH Nordica Страницы: 56

Бренд: ARDESTO Страницы: 20

Бренд: Hotpoint Ariston Страницы: 32

HC 61053 series

Бренд: Kaiser Страницы: 72

OceanChef XL G1007

Бренд: GN Espace Страницы: 16

Бренд: GN Espace Страницы: 16

Бренд: Dacor Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды