manualshive.com logo in svg

Wolf CT15I, Техническое и сервисное руководство

Поделиться
Скачать
Wolf CT15I Скачать руководство пользователя страница 8

Induction Cooktop

General Information

1-6

MODEL CONFIGURATIONS

MODEL FEATURES

•  Classic stainless steel trim fi nish. (Unframed Models do not have a Stainless Trim)
•  Easy-to-clean black ceramic glass surface is resistant to scratching, staining, impact and heat.
•  High-effi ciency induction elements deliver power and control.
•  Induction elements heat cookware, not the glass, for a cooler, safer cooking surface.
•  Cookware sensing elements will not be energized without an induction-compatible pan on the cooktop surface.
•  Hi-Power mode boosts power to the element.
•  Temperature limiter to ensure that safe operating temperature of glass ceramic is never exceeded.
•  Illuminated touch controls with graduated control lighting and adjustable sound frequency and volume.
•  Hot-surface indicator light in control panel.
•  Lock mode - cooktop will be locked so that no elements can be turned on.
•  Universal off turns all elements off.
•  Countdown timer with one to 99 minute range.
•  CSA certifi ed for US and Canada.
•  Two and fi ve year residential warranty

Model Number: 

CT30I/S

Description: 30” With Stainless Steel Trim

Model Number: 

CT30IU

Description: 30” Without Stainless Steel Trim

Model Number: 

CT36I/S

Description: 36” With Stainless Steel Trim

Model Number: 

CT36IU

Description: 36” Without Stainless Steel Trim

Model Number: 

CT15I/S

Description: 

15” with Stainless Steel Trim

Содержание CT15I































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды