Cooktop Specifications
7
wolfappliance.com/specs
Electrical Requirements
IMPORTANT NOTE:
For electrical installation, attach the
conductors to the residence wiring in accordance with
National Electrical Codes and all state, provincial, munici-
pal and local codes.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and power ratings are listed on the
product rating plate, located on the underside of the
cooktop. Refer to the illustrations on page 3 for location
of the rating plate.
The complete appliance must be properly grounded at
all times when electrical power is applied.
Do not ground appliance with the neutral (white) house
supply wire. A separate ground wire must be utilized.
If aluminum house supply wiring is utilized, splice the
appliance copper wire to the aluminum house wiring
using special connectors design and agency certified
for joining copper and aluminum. Follow the connector
manufacturer's recommended procedure carefully.
Improper connection can result in a fire hazard.
