Maintenance
Important! Disconnect from power supply before performing maintenance and cleaning.
Clean the machine without water after each use. Please note: the air intake slots of the electric motor must be freed from grass and
moss accumulations!
Do not spray machine with water.
Store machine in a dry room.
Replacing the springs (fig. W1W2)
Important! Disconnect from power supply before performing maintenance and cleaning.
The aerator UL 33 E is equipped with 21 double springs, which can be easily replaced.
Removal
Unhook spring coils (1) using universal pliers and raise them until they are above the holding peg (2). Unhook opposing spring coils
and remove complete spring.
Replacement
Place spring into the recess (3) with the shackle facing down. Press first the left and then the right spring coils (4 and 5) inward and
push them above the holding peg (6).
Note
Insert the springs in such a way that the angular shackles point to the back (toward the operator) W2.
Replacement springs:
Order no. 3620 095 (UV-EFF, Quantity: 21)
Faults and how to remedy
Guarantee terms
Please carefully retain the guarantee card completed by the seller, or the proof of purchase.
The company WOLF-Garten provides a guarantee for 24 months from the date of purchase. This guarantee is in accordance with the relevant state of
technology and the utilisation purpose / area of application. The consumer‘s statutory rights are not affected by the following guarantee guidelines.
Pre-conditions for the 24-month guarantee entitlement:
- Deployment of the device solely for private use.
The guarantee is reduced to 12 months in the commercial sector or leasing business.
- Proper handling and observance of all information given in the operating manual, which forms part of our guarantee terms.
- Observance of the prescribed maintenance intervals.
- No unauthorised alteration of the design.
- Installation of original WOLF replacement parts / accessories.
- Presentation of the completed guarantee card and/or proof of purchase.
This guarantee does not extend to normal wear-and-tear on blades, blade mounting components or friction disks, V-belts/toothed belts, running wheels/tyres,
air filters, spark plugs and spark plug connectors. Any guarantee claim shall be immediately void in the event of unauthorised repairs.
Faults and defects which can be traced to material or manufacturing faults will be rectified exclusively by our contracted workshops (the seller has the right
to remedy a defect) in your vicinity, or by the manufacturer if the latter is closer. Any claims going beyond the provision of a guarantee are ruled out. There
is no entitlement to a replacement. Any transport damage should be reported not to us but to the shipper in question since, otherwise, any compensation
claims vis-à-vis the shipper would be voided.
Remedy (X) by:
Problem
Possible cause
WOLF
service
workshop
Yourself
Machine runs unevenly or
vibrates heavily:
Springs are damaged
---
X
Uneven running, heavy
vibrations in the mower:
Blades damaged
Blades loose in the fastening parts
X
---
---
X
Motor will not run:
Fuse blown
Cable damaged
Important:
If you inadvertently cut through the cable, the
fuse (1
0
Amp) will not always blow. In the interest of
safety, never touch damaged or severed cables before
disconnecting the mains plug. Repairing the cable with
insulating tape is prohibited.
---
X
X
---
Poor aerating:
Springs are worn
Grass is too wet
Working depth is incorrect
Cylinder is extremely dirty
---
---
---
---
X
X
X
X
When in doubt, always consult a WOLF service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.
9
Содержание UL 33 E
Страница 41: ...41 Notes...
Страница 42: ...42 Notes...
Страница 43: ...43 Notes...
Страница 45: ...45...