�����������������
�����������
�������������������
������
Vario-Handle
��������
Adjustable Vario-Handle with rollers.
��������
convenient trimming without
stooping.
���
Shear blade
��������
Cutting width 80 mm
10
Maintenance
Storage
For storing the rechargeable shears select a dry place out of the reach of children and insure that
this area is free of frost in the winter.
Cleaning
•
Clean the cutter head with a dry cloth after each trimming.
•
The drive should be cleaned and lubricated at the end of the gardening season (see „change
cutting blades“).
Attention!
•
Ensure that red safety button prevents push button moving.
•
Drive repairs may only be carried out by a WOLF service facility!
Change of blades* (Abb. W1/W2/W3/W4/W5)
It is advised that this job is done by a skilled person!
Attention!
Ensure that red safety button prevents black push button moving forward accidentally.
Depress red push button at the bottom of the unit with the thumb of one hand. Pushing the black
sliding base forward over the red button with your other hand. Unscrew the two fixing screws and
exchange blade assembly. Clean gear housing thoroughly and grease with Vaseline. Grease new
blade assembly around the plastic ring. Move upper blade slowly to either side until you hear the
plastic ring engaging. Replace fixing screws and tighten without using force.
*For replacement blades see accessories
Accessories
Adjustable Vario-Handle with rollers
•
Ensures easy and accurate lawn edge trimming without having to bend down.
•
Shear head is adjustable to trim at any angle within 90 degrees
(Abb. Z1)
.
Montage (Abb. Z2/Z3)
Metal holding bracket supplied should be used to connect unit with long handle attachment as
illustrated.
