Wolf Garten 10534047, Руководство пользователя

Страница: 26 / 198

Transport and storage
EN
26
Adjusting the end stop of the cutting blade
F
The end-stop of the cutting blade can be adjusted
on pruning shears so that the cutting device closes
properly, thereby ensuring the best possible cut.
The adjustment should be check by a specialist
workshop once a year.
If the cutting device no longer fully closes, the
end-stop can be adjusted using the adjustment
screw [A] .
Only have this adjustment carried out by a specialist
workshop in order to avoid damage to the pruning
shears.
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾
Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾
Remove the operating arm before
transporting or storing the device.
Transport
Î
Secure the device sufficiently to prevent its unin -
tentional slipping if you are transporting it on or in
a vehicle.
Storage
Î
Perform cleaning and servicing work before
storage.
Î
Store the tool in a dry location out of the reach of
children.
Î
Store the operating arm and pruning shears sep -
arately.
Î
Store the operating arm in a cool and dry loca -
tion. Recommended storage temperature ap -
prox. 0 - 23°C
Î
Keep the device and especially its plastic com -
ponents away from brake fluids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
device.
Î
Fertilizers and other garden chemicals contain
substances that may have a highly corrosive effect
on the metal parts of the tool. Therefore do not
store your tool near to these substances.