Wolf Garten 10534047, Руководство пользователя

Страница: 22 / 198

Safety information
EN
22
¾
Before making adjustments to the device or
cleaning it, switch the device off and remove
the power pack or remove the operating arm,
in which the permanently installed battery is
located.
¾
Ensure that the tool is fully assembled
according to the instructions.
¾
Read and observe the operating manual of the
charger and operating arm in which the power
pack is permanently installed.
During use
¾
Never leave the tool unattended during breaks
and store it in a secure location.
¾
Be aware of hidden objects when working.
¾
Always hold the tool firmly with both hands.
¾
Also when working maintain a safe distance
relative to the cutting tool.
¾
If you have long hair, wear a hairnet.
¾
Take extra care if you are walking backwards.
Risk of tripping!
¾
Switch the device off when carrying the
device to or from separate working positions.
¾
Never bypass or tamper with safety devices
installed on the device (e.g. by taping the
switch to the handle).
¾
Always be aware of your environment and
possible hazards which you may not be able
to hear because of the noise of the device.
¾
No other persons or animals may remain
within a circumference of 15 metres around
the cutting area because they may be injured
by ejected objects.
¾
Do not work in poor lighting or weather
conditions.
¾
Only use the tool for the work for which it is
intended.
¾
Ensure that you can stand safely and securely
in every work position.
¾
Do not use ladders, as these can result in loss
of balance or loss of control of the tool.
¾
Do not stretch the arms too far forwards.
¾
Never work while stood on or in trees.
¾
Do not cut any wooden parts that are under
strain.
¾
Never work alone. Ensure that you within
earshot or sight of, or have some other form
of connection with another person, who is
able to provide first aid in an emergency.
¾
If you are setting the tool down, always
ensure that the motor is turned off.
¾
Never use the tool in a wet or moist
environment.
After use
¾
Switch the device off, remove the operating
arm from the device and check the device for
damage. Attention, danger! Cutting tool still
running!
¾
If you need to clean or service the device,
switch it off and remove the operating arm.
Attention, danger! Cutting tool still running!
¾
Always wait until the cutting tool comes to
a standstill and do not touch any moving
dangerous parts without first removing the
operating arm from the device.
¾
Do not clean the device with water.
¾
Store the device in a secure location.
¾
Store the device out of reach of children.
¾
Let the device cool down before putting it
away and/or storing it.
General safety information
¾
Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions and
always remove the operating arm from the device
prior to use.
¾
Repairs must only be performed by a qualified
technician or service centre. Specialist
workshop addresses can be found on our
website.
¾
This pruning shears are intended for the care
of trees and shrubs in private households.
The device must not be used for purposes other
than those intended because of the risk of bodily
injury to the user or other persons.
¾
Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and fires.
¾
Regularly check all screw or bolt joints to
ensure they have not come loose.
¾
Ensure maintenance work is always
performed to schedule. This ensures that the
safety of the power tool is maintained.
¾
Switch the device off and wait until the cutting
tool comes to a standstill before removing the
operating arm.
¾
Replace all worn or damaged information
signs on the device.
Safety information