Wolf cinema SDC-12, Руководство пользователя

Страница: 58 / 81

Auto
Open
On
Off
On
Off
57
SDC-12/SDC-15
A
B
Off
The video images are enlarged [stretched] in the vertical direction of the panel resolution. This setting is used when
one uses the anamorphic lens to enlarge them in the horizontal direction.
(*) Anamorphic modes cannot be set when there is a 3D signal input.
If a 3D signal is fed in whenever the Anamorphic modes are set to A or B, the Anamorphic modes are automatically turned Off.
Settings: A, B, Off
[Off]
Video with an aspect ratio of 2.35:1 is enlarged in the vertical direction of the panel resolution and projected.
Video with an aspect ratio of 16:9 are displayed by reducing them in the horizontal direction, without changing their size in
the vertical direction.
Used when watching video images other than those with a 2.35:1 aspect ratio while using an anamorphic lens. 2.35:1 video images
are projected without any changes. (Black bands appear on all sides)
This control may correct for white balance errors, when determined to occur from the non-uniform reflective properties of
the projection screen.
Please adjust to your preference.
By configuring “Environment Setting” according to the viewing environment, image quality adjustment and correction according to
environmental differences are preformed automatically to minimize any influence on the image quality.
Adjusts black level when used indoors.
Settings: 0 to 10
[0]
Anamorphic
Screen Adjust
Environment Setting
Black Level
Focus
Zoom
Shift
Lens Cover
Image Pattern
Lock
3-1 Lens Control
Pincushion For correcting distortion of the projection screen.
Setting range: -20 (pin-cushion) to +20 (barrel) [correction cannot be performed during 3D signal input]
This controls each motorized functions of the lens during projector installation.
This function is used to adjust focus.
This function is used to adjust zoom.
This function is used to adjust shift.
This function is used to set the lens cover position, and whether or not it should be linked with a power supply for
opening/closing, or simply left open.
Settings: Auto, Open
[Auto]
This opens/closes the lens cover when linked to power on/off commands.
Regardless if the power is on/off, the lens cover is always open.
An Adjustment pattern can be displayed when setting focus and zoom.
Settings: On, Off
[On]
During the adjustment, the image pattern is displayed.
The image pattern is displayed in conjunction with the above items.
Off
The external input signal is displayed without displaying the image pattern.
This locks the lens adjustment controls
Settings: On, Off
[Off]
This turns on the lens “lock” feature. If the remote control button “LENS” button is pressed, a warning message is issued.
This enables all lens control functions.