Wolf cinema SDC-12, Руководство пользователя

Страница: 57 / 81

56
SDC-12/SDC-15
10 8 0p D-IL A 3D Front Projector 2013 User ’ s Manual
Auto
Frame Packing
Side by Side
Top and Bottom
2D
Y Pb/Cb Pr/Cr
RGB
Horiz.
Vert.
Front
Ceiling Mount (F)
Rear
Ceiling Mount (R)
Horizontal
Vertical
Determines the format of the 3D input signal.
Some signals may not be embedded with 3D information, thus the image projected may not occur in 3D if they are recognized as 2D images.
If this occurs, you will need to reconfigure the 3D settings manually.
(*) It is recommended to read "On 3D" (reference page: 53) before watching 3D video images.
Settings: Auto, Frame Packing, Side by Side, Top & Bottom, 2D
[Auto]
3D formats are determined automatically.
Select this if the 3D input signal is the frame pack method.
Select this if the 3D input signal is the side by side method.
Select this if the 3D signal is the top and bottom method.
Projected as a 2D signal.
(*) The Component video input selection.
This configures the input signal method of the component input.
Settings: Y Pb/Cb Pr/Cr, RGB
[Y Pb/Cb Pr/Cr]
The setting for the component video input signal.
The setting for the RGB video image input signal.
(*) The PC input selection.
The picture position of Tracking and Phase will be automatically adjusted.
Adjusts the size and display of the horizontal direction and display area of the video images.
(Depending on the signal, there is typically little need for adjustment)
Adjusts the flickering and blur of the video images.
(Depending on the signal, there is typically little need for adjustment)
Adjust the picture positioning.
Adjusts the horizontal position of the image.
Adjusts the vertical position of the image.
To Sub-menu “[3-1] Lens Control” Pixel Adjust
To submenu “[3-2] Pixel Adjust”
Adjusts for the projector’s position; one can switch horizontal and vertical flip / forward switch.
Settings: Front, Ceiling Mount (Front), Rear, Ceiling Mount (Rear)
[Front]
Front upright projection mode.
Ceiling/front projection mode.
Rear upright projection mode.
Ceiling/ rear projection mode.
Concerning the projection plane, keystone correction may be deployed (especially useful when the projector is not
parallel to the screen or environment).
(*) There may be instances, when the video image - after having corrected for keystone distortion - will still not
match the screen. The position with a shift correction of 0% position is one exception.
(*) With 3D input signals, keystone adjustment is not possible.
Adjusts the horizontal keystone.
Settings: -40 to 40
[0]
Adjusts the vertical keystone.
Settings: -30 to 30
[0]
3D Format
Color Space
Auto Alignment
Tracking
Phase
Picture Position
Lens Control
Pixel Adjust
Installation Style
Keystone
2-2 Component Video
2-3 PC
3 Installation