Wöhner 36255, Руководство пользователя

Страница: 6 / 10

6
Electronic motor starter with reversing function
For additional information, please refer to the
corresponding documentation of the relevant
product at
www.woehner.de/en/
Short description
The network-capable 3-phase hybrid motor starter with re-
versing function and current monitoring provides the follow-
ing functions:
– Forward running
– Reverse running
– Motor overload protection
– Engine lock protection
– Electronic short-circuit protection C14
– Galvanical interruption
– Current measurement
– Voltage measurement
– Power measurement
– Connection to IO-Link-systems
The amount of cabling required is reduced to a minimum
by the internal locking circuit and the load wiring.
1. Content of the EU Declaration of
Conformity
Manufacturer: Wöhner GmbH & Co. KG,
Mönchrödener Str .10, 96472 Rödental, Germany
Product designation Part No.
MOTUS
®
C14 Connect 2,6 A, Panel 36243
MOTUS
®
C14 Connect 2,6 A, 30Compact 36244
MOTUS
®
C14 Connect 2,6 A, 60Classic 36245
MOTUS
®
C14 Connect 2,6 A, CrossBoard 36246
MOTUS
®
C14 Connect 6,6 A, Panel 36247
MOTUS
®
C14 Connect 6,6 A, 30Compact 36248
MOTUS
®
C14 Connect 6,6 A, 60Classic 36249
MOTUS
®
C14 Connect 6,6 A, CrossBoard 36250
MOTUS ® C14 Connect Plus 2,6 A, Panel 36255
MOTUS ® C14 Connect Plus 2,6 A, 30Compact 36256
MOTUS ® C14 Connect Plus 2,6 A, 60Classic 36257
MOTUS ® C14 Connect Plus 2,6 A, CrossBoard 36258
MOTUS
®
C14 Connect Plus 6,6 A, Panel 36259
MOTUS
®
C14 Connect Plus 6,6 A, 30Compact 36260
MOTUS
®
C14 Connect Plus 6,6 A, 60Classic 36261
MOTUS
®
C14 Connect Plus 6,6 A, CrossBoard 36262
The above mentioned product conforms with the most im-
portant requirements of the following directive(s) and their
modification directives:
2014/35/EU
Low Voltage Directive
2014/30/EU Electromagnetic Compati-
bility Directive (EMC)
IEC / EN 60947-4-2 Product standard
2. Safety Notes
2.1 Installation notes
•
When working on the device, observe the national safety
and accident prevention regulations.
• Disregarding these safety regulations may result in death,
serious personal injury or damage to equipment.
• During operation, parts of electrical switching devices
carry hazardous voltages.
• This device may only be commissioned, installed or retro-
fitted by an electrically skilled person.
• Before working on the device, disconnect the power.
• Protective covers must not be removed when operating
electrical switching devices.
• Keep the product documentation in a safe place.
• Do not subject the device to mechanical and/or thermal
loads that exceed the specified limits.
• To protect the device against mechanical or electrical
damage, install it in a suitable housing with an appropriate
degree of protection of at least IP54 in accordance with
IEC/EN 60529.
• Install the device according to the instructions in the in-
stallation instructions.
Access to circuits within the device is not permitted.
• Do not repair the device yourself; replace it with an equiv-
alent device. Repairs may only be performed by the manu-
facturer. The manufacturer is not liable for damage result-
ing from noncompliance.
• You will find the safety-relevant data in this documenta-
tion and the certificates.
• Only use power supply units with safe isolation with
SELV / PELV voltage in accordance with
EN 50178 / VDE 0160 (SELV / PELV). This prevents short
circuits between primary and secondary sides.
• The device must be operated in a closed control cabinet!
• Observe the minimum permissible load current in safety-
related applications:
2.6 A devices: ≥ 100 mA
6.6 A devices: ≥ 100 mA
Area of application
•
This is a product for environment A (industry). The device
can cause unwanted radio interference if used in Class B
environments (household). In this case, the user may be
obligated to take the necessary precautionary measures
3. UL notes
WARNING: Risk of electrical shock and fire
The opening of the branch-circuit protective device may be
an indication that a fault current has been interrupted.
To reduce the risk of fire or electric shock, current-carrying
parts and the other components of the controller should be
examined and replaced if damaged.
Failure to follow instructions can result in death, serious in-
jury, or equipment damage.
NOTE
The device is designed for use with a "low voltage, limited
energy, isolated power supply".
For use with a "low voltage, limited energy, isolated power
supply" use copper cables approved to at least 75 °C.
Suitable for use on a circuit with a maximum of 100 kA rms
symmetrical amperes and ≤ 480 V.
FLA 2,6 A (480 V AC), 6,6 A (480 V AC).