Wohler AMP2-16V-M, Руководство пользователя

Страница: 79 / 172

Page 72
Follow Monitor Mode Controls
In Follow Monitor mode (Figure 5–6 below) you can direct the channels selected in
the Monitor Mixer Configuration Menu (Figure 5–7) to be output through the
Analog (or AES) Output Card.
Figure 5–6: Analog Output Configuration Menu - Follow Monitor
Save / Exit Help Cancel
Mute
With
Phones
Yes
Analog Output Slot 3 Configuration
Menu
Free Mix
Follow
Monitor
Follow
Monitor
+0 +0 +0 +0
L. Front R. Front Center LFE
Yes
Yes
Select
Affect
Main
Volume
Affect
Mixer
Channel
Select
Output
Trim
Output 1 Output 2 Output 3 Output 4
7.1 Outputs
Height
Output
Group
Select
1. Mixer Channel Select: Rotating this knob moves a highlight between the
source channels. Other controls then affect the selected channel.
2. Channel Trim: Rotating this knob changes the gain on the selected channel.
This control has a range of -60 dB to +12 dB (inclusive) in 1 dB increments.
You can mute the channel by turning the knob counterclockwise beyond -60
dB. Pressing and holding this knob returns the setting to 0 dB.
3. Select Affect: Pressing or rotating this knob selects Yes or No, and
determines whether all the outputs are affected by the Cluster Select hot
keys on the Main Screen.
4. Main Volume Affect: Pressing or rotating this knob selects Yes or No, and
determines whether all the outputs are controlled by the front panel Volume
control.
5. Mute with Phones: Pressing or rotating this knob selects Yes or No, and
determines whether all the outputs are muted by the presence of a plug in
the front panel headphone jack.
6. Analog output cards have only 8 outputs, so in order to present surround
formats with more than 8 channels, you must have two analog output cards
installed in the system. Use the Output Group Select control to determine
which analog output card carries the first 8 channels, and set the other card
to carry the remaining channels.