Page
16
Audio Menu
This menu allows adjustment of various audio related settings. Buttons 1, 2, and 3
together form a Speaker Mute selector. The default Speaker Mute is Mute with
Headphone. Buttons 5 and 6 together form an Analog Output selector. The
standard Analog Output is Fixed Line Level.
Figure 3–2: Audio Menu
1.
Never Mute: Pressing this button selects the option that the internal
speakers will not mute when headphones are plugged into the headphone
jack.
2.
Mute with Headphone: Pressing this button selects the option that the
internal speakers will mute when headphones are plugged into the
headphone jack. This is the default setting.
3.
Always Mute: Pressing this button selects the option that the internal
speakers will always be muted. This setting can be convenient to use when
monitoring is always done through the analog outputs with external
amplifiers and speakers.
4.
Fixed: Pressing this button fixes the line level of the analog outputs as they
are in the SDI signal, where -20 dBFS = +4 dBu (± 1 dB). This is the default
setting.
5.
Volume/Balance: Pressing this button enables the Volume and Balance
controls to affect the analog outputs. This setting can be convenient to use
when monitoring is always done through the analog outputs with external
amplifiers and speakers.
Note: If the Analog Output is set to Volume/Balance Controlled and the
Speaker Mute is set to Always, then plugging in the headphones will
cause the analog outputs to mute.
