Page
13
Getting a Configuration from the Flash Drive
1.
To load a configuration file to the AMP1-8-M from your flash drive, press Get.
The Get a setup from the Flash Drive screen will display as shown in
Figure 2–4 below.
Figure 2–4: Get a Setup from the Flash Drive Screen
2.
Using one of the bright green choices, press the file number (File 1 through
File 7) of the file you want to copy from your flash drive. Once the copy
process completes, the Flash Drive Connected screen re-displays.
Note: The configuration takes effect immediately when you press the File
button.
3.
Remove the flash drive from the USB port.
Save System Configuration to Flash Drive
1.
To copy a file to the flash drive from the AMP1-8-M, press
Save
from the
Flash Drive Connected
screen. The
Save to Flash
Drive
screen will display
as shown in
Figure 2–5.
The lighter color
buttons indicate file numbers that
are already occupied with data.
Figure 2–5: Save to Flash Drive Screen
