Wogaard Coolant Saver
TM
Manual
Version 1.2-Eng
Page
15
of
19
3.
Open the ball valve, until suction can be registered at the vacuum cup. Opening the ball
valve half-way, as shown in fig. 7 below, is usually enough to generate the vacuum.
Note: The vacuum or collection flow-rate, is not proportional with the liquid volume
flowing through the venturi-unit. Simply open the ball valve enough to create a vacuum
effect.
Fig. 7
The system is now operating as intended, and no further adjustment is needed.
You do not need to shut off the equipment when changing the chip container. Simply pull
out the vacuum cup from the current container, and place it in the new container.
