19
Long pressing of a name will come to the batch mode, and then batch deletion is available.
Figure 18
3.
Driver Recognition
There two ways to run the FRS, firstly, press the “TEST LOGIN” option in FRS setting page, refer to
the above figure. Secondly, after the system powers up or reboot, the FRS function will
automatically run. It will guide the driver to shake his (her) head and blink for recognition process by
voice. The recognition results are feedback both by voice and notice in the video of monitor as
follows. Once Face recognize match and got success, it can be configured for immobilizer to triger
an output to activate a relay immobilizer.
When an unregistered driver is detected, the system will record the recognition process video into
the micro
Micro SD
card for playback. About how to play back the video, please refer to chapter 8.3.
Note
: The start-up of the driver fatigue monitoring system may take about 10S, please keep a
normal driving posture for better face recognition after hearing the voice guide.
Figure 19
