WMF BISTRO 8000, Руководство оператора

Страница: 7 / 35

45
3 Safety instructions
General notes
1. At the end of the working day always ensure that the shut-off device on the water pipe
supplying the machine is closed and the main power switch to which the machine is
connected is switched off and/or the plug is removed from the socket.
2. The component-tested safety devices fitted prevent inadmissible pressure and temperature rise
in the boiler. If the safety valve is activated, the machine should be switched off immediately
at the customer’s main switch. Switch off the machine if a boiler malfunction occurs. Contact
the WMF customer service department and do not switch the machine on again until the fault
has been remedied.
3. This machine is not for use out of doors. In case of freezing the machine should be drained
beforehand to prevent frost damage.
4. Never spray the machine with a hose. Steam cleaners, steam-jet cleaners and similar
equipment must not be used to clean the machine. Clean the surface by wiping with a damp
cloth, or use products from our WMF care range.
5. The unit must stand safe at a ground level, on a horizontal and stable base.
Machine shutdown – holidays
1. If the machine is to be shut down for an extended period, a general clean should be carried out
beforehand and the grouts container must be emptied. If there is any risk of freezing, the
machine should be drained beforehand to prevent frost damage. In such cases, call in the
WMF customer service personnel in good time.
2. After several weeks of shutdown for holidays, we recommend that the fully automatic cleaning
program be run at least twice before the machine is started up again.
Hot water boiler data –
see rating plate
The hot water boiler complies with the Pressure Equipment Directive 97/23/EC - Category 1,
Module A.
The hot water boiler is subject to neither notification nor licensing. Each hot water boiler is
subjected to hydrostatic tests before delivery to the customer.
The operator of such equipment is responsible for due maintenance and verification of the safety
mechanism.
The machine complies with all the relevant regulations.
The operator is obliged to ensure that electrical plant and equipment is tested to establish that it is
in safe working order (e.g. german law BGV A3).