27
For the proper centrel installation, the relevant ftp parameters must be defined first. When you were
Started the remote installation, and the ftp server is available, in the first phase the firmware download
will be started. This will be assigned by the status messages hereby – according to the serial port
firmware refresh. At the and of the process, the device will restart and disconnected from the serial
port connection.
4.7 Device restart
If you are attempted to restart the
Easy 2S NB
, then click on the right-side Restart device button at
the bottom of the screen.
Then the device will send the
RESET
command in the
Terminal window
(3) to the device. The
signal strength and status will be faded out.
The
Restart device
message appears, then the device will be restarted. After booting it reconnects to
the serial port. When the status and signal values will be available, these will be assigned to the status
part with the colour LED status.
4.8 Factory default settings
If you would like to delete the current
configuration and restore the original settings
of the
Easy 2S NB
, then click on the Factory
reset button at the bottom of the screen.
Then answer Yes to confirm the erase
configuration command to perform.
