20
In case of any failure read the Troubleshooting chapter!
Status
window (2):
When the „
connected
” title appears, this means that the serial connection to the device was
performed succesfully.
The „
disconnected
” assigns the disconnection of the device from the USB serial port,
which means that it is not available through the port (reconnect the cable and the device or
restart device when it is necesssary) – if the cable is already connected, then push the
Connect button for connecting.
When the
EasyTerm
is not necessary to use further, and you’d like to split the connection, then push
the Close button in the
Connection window
(1), and the serial connection will be closed
immeadiately (in case of GPRS connection, you can close the connection by the Disconnect button.
Remove the serial connector from the Computer.
If you will get the
Login Failed
message several time in the
Terminal window
(3), that means the
password you were filled in is wrong. Fill the proper password to the TCP-IP connection at the GPRS
Login and retry the connection.
Password reset:
On the Reset password tab, at the
Password
field, fill or copy the IMEI’s middle 5
characters, then push the Reset button.
Then the
Easy 2
password will be restored and
recovered to the
ABCD
default value.
Monitoring the serial port messages:
At the 4th tab, at the Serial Monitoring, you can Open it, and connect to the device in surveillance
(read only) mode, when only the left side of the window is active with the signal strength data and
terminal window messages.
This feature is provided for monitoring, checking
the
Easy 2
current operation without any
intervention or configuration change.
Further details on the Chapter
4.4
.
When you are attempted to Close the
monitoring, after all you should click to the
Serial Port tab, for connecting the device for
parameter configuration.
