- 16 -
4.10 GPS
After the boot, carry out the following operation on the screen: Setting the
→GPS Function→ click the "OK" key→ turn on or turn off the GPS Function; only
in the state where GPS Function is on, the device will begin to search GPS signal, as
shown in the following figure:
The symbol
appearing in the middle of the screen indicates that the GPS
Function has been turned on, otherwise the GPS Function is off.
In order to ensure that the equipment can find the GPS signal as soon as
possible, the operator shall carry the equipment to go outside and choose an open
space as far as possible, while turning on WIFI or mobile data. Under the situation
where the location and related conditions can be met, the device will spot GPS signals
about 30 seconds after the boot. GPS signal might be weakened when it comes to
the locations where signals are obstructed, such as between buildings, in low-lying
areas or in harsh weather conditions.
(I) GPS status
After the boot, carry out the following operation on the screen: Setting →GPS
Function→ select "GPS Function"→ click "M" key; it will display the menu of "GPS
Status”; select the menu bar of "GPS Status", and click "OK" key; then the status of
current GPS satellite can be displayed, as shown in the following figure: