Safety
9
Original-Betriebsanleitung
HD1+HD2
•HD1-2_BAoDB_en_1407•ski
Transporting and additional equipment
➤
Cut off the air supply to the pump, even when transporting for short
distances.
➤
Before transportation, empty the machine.
➤
Stay alert when loading the pump, whether a hoist is being used or not!
➤
Observe the max. load capacity of machines used for lifting.
➤
Never stand under suspended loads or in the lifting area. This is extremely
dangerous!
➤
Only use suitable transportation vehicles with sufficient load capacity.
➤
Ensure the pump is properly secured to the vehicle transporting it to avoid
slipping or tipping.
➤
Parts or equipment dismounted for transportation
purposes must be properly remounted by a trained
technician before start-up.
To enable safe lifting, a grip is located on the injec-
tion pump‘s air motor, (picture 2.1).
➤
2.8 Behavior in case of emergency
Leaks
If leaks occur in the system:
➤
it must be shut down immediately and the entire system depressurized:
➤
Cut off the compressed air supply with the air tap lock.
Injury
➤
Should an injury occur through contact with liquid spray, we recommend a
doctor be called immediately.
➤
Inform the doctor of the material sprayed (e.g. paint) and the solvent
(thinner). Have the product data sheet at hand (address and telephone
number of supplier or manufacturer, name of material and material number).
➤
Memorize where you can call for aid.
➤
Memorize the local emergency phone numbers.
➤
Become familiar with the first-aid measures.
Fires
➤
Read the instructions for fire alarm and escape routes put up inyour factory.
➤
Do not apply any other extinguishing agents than those which are prescribed
by the manufacturer of the materials.
Picture 2.1
