WITURA TECHNOLOGY SDN BHD
|
WT-1673 GSM Power Switch User Manual V1.3
7
5
Delete the admin number in the list. *3*N#
N = Admin number 1- 5
For example, if you want to
delete admin no 2.
just enter *3*2#
Administrator:
1: 15989427391
2:
3:
4:
5:
2013-10-10 16:08 Thu
Delete Admin Number
Delete 1st admin *3*1#
Delete 2nd admin *3*2#
Delete 3rd admin *3*3#
Delete 4th admin *3*4#
Delete 5th admin *3*5#
6
Check the relay status in ON or OFF
Mode.
*4*
AC <ON>
2013-10-10 16:10 Thu
The unit will return AC <ON> if
the relay is on.
The unit will return AC<OFF> if
the relay is off.
7
Check Signal Strength
*5*
CSQ<28>
2013-10-10 16:11 Thu
You must confirm the signal
strength at site before you
install the unit.
If the signal too weak, the unit
will not function properly.
CSQ 5 – 12 Signal too weak,
system not function
CSQ 13 - 24 Signal Good. System
function well
CSQ 25 – 32 Signal Excellent.
System working well
8
To receive SMS Reply Message or
not to receive SMS Reply Message
when the system trigger by phone
call
*22*N#
When sending
command *22*0#
Status switch <OFF>
2013-10-10 17:10 Thu
When sending
command *22*1#
Status switch <ON>
2013-10-10 17:08 Thu
N=1 means after make the
phone call to the system, it will
return the SMS for the status to
the caller
N=0 means after make the
phone call to the system, it will
not return the SMS for the
Status to the caller
Factory Default as return SMS
for the status after make the
phone call
** If you decide not to allow the
system to text you for any
acknowledgement after you call
to the unit. You can switch OFF
the text message. Some
Customer request this function
because texts reply involved
call cost
