(
6
) Connect the left threaded bar with the left
threaded fork joint and the right threaded bar
with the right threaded fork joint and count-
er both sides with a nut.
(
7
) Connect the left threaded bar and the right
threaded bar with the turnbuckle (H). After
setting the synchronization with the turn-
buckle, the turnbuckle must be countered on
both sides with a nut.
(
8
) Adjust the synchronization retaining spring (I)
with the nut (J) so that the required activation
force (according point 4) is achieved. With a
travel height more than 150 m (500 ft) is a
synchronization retaining spring on both safe-
ty gear sides. These must be set equally strong.
After adjusting the spring, lock with the sec-
ound nut.
All screw connections must be screwed far
enough and countered with a nut.
Progressive Type Safety Gear
WSGB04, WSGB10
Operating instructions
Blatt/
sheet
D7AMMGB.24
Datum/
date
11.04.2003
Stand/
version H-07.08.2020
Geprüft/
approved WAT/KKR
Änderungen vorbehalten!
Subject to change without notice!
(
3
)
(
7
)
H
H
(
8
)
I
J
I
J
Simplex
Duplex
