2.4
Installing isolated platform sup-
ports
If the WCS60 is delivered with isolated platform
support beams ...
(
1
) Fit the platform support to the lower cross
beam
Tighten the screw joints loosely only!
(
2
) Check that the support beams are
in horizontal position.
(
3
) Tighten then all screw joints
Take care of tightening torque
Screw M16: 195Nm
2.5
Installing “non-isolated” platform
supports
If the WCS60 is delivered without isolated plat-
form support beams ...
(
1
) Fit the platform support to the lower cross
beam (adjust according car platform needs)
Tighten the screw joints loosely only!
(
2
) Check that the support beams are in horizon-
tal position.
Tighten screw joints after car platform is
adjusted!
(
1-3
)
(
1-2
)
Car Frame WCS60
Suspension 2:1 / 4:1
Operating instructions
Blatt/
sheet
D389MGB.010
Datum/
date
11.02.2002
Stand/
version
11.02.2002
Geprüft/
approved WAT/FLE
Änderungen vorbehalten!
Subject to change without notice!
Screw ... M16x70 (12x)
Screw ... M12x50
