4 / 11
Opening with active delay time
Start through code input
=
→
If a delay time has been
programmed, this must be started
first by inputting a valid opening
code. It can then be opened by
inputting any desired valid user
code during the time window for
opening.
User 9 cannot start the delay, but
instead can open before the end of
the delay time.
=
♪
…2 sec…
♪
…2 sec…
♪
…2
sec…
♪
…1 sec…
♪
…1 sec…
♪
…1
sec…
Input the code for opening
=
→
=
→
Triggering a silent alarm
e.g. opening code 1234567, alarm addend
2
Start through code input
=
→
The last code digit is amended in
each case with active "silent
alarm". The calculation is done on
the basis of the last digit + alarm
addend. If a number is carried over
then the units are evaluated:
e.g. code number 9 + alarm
addend 2 = 11, hence the last
number is = 1
→
=
→
The locking check can be done via the operating lever of the boltwork and should be
performed after each closing and locking.
