Wittke TWIN AUGER, Руководство оператора

Страница: 33 / 87

Safety 25
Figure 2-4 In-cab camera
Safety Lockout Tests
The safety lockout tests are part of your daily inspection. Successful completion of these tests ensures
that your unit is safe to operate. If any of these tests fail, do not operate your unit until the appropriate
adjustment or service has been completed.
I
MPORTANT
:
Your front loader unit may be equipped with other safety lockout options not mentioned herein.
Consult your supervisor and/or maintenance department if you have questions or you are in doubt.
Arms and Forks Fully Retracted Proximity Switches
Successful completion of this test ensures that the Arms Not Stowed button on the control panel
turns red when the arms and forks are moved away from their parked position.
For this test, proceed as follows:
1.
Lower the arms and forks.
The Arms Not Stowed button on the control panel should become red.
2.
Fully raise the arms without parking the forks.
The Arms Not Stowed button should still be red.
3.
Park the forks.
The Arms Not Stowed button should no longer be red.
4.
If the Arms Not Stowed button on the control panel is still red, the related proximity switches
(one located on the left-hand side fork, the other on the left side of the arm tube) may need to be
adjusted or replaced. Refer to the
Limit and Proximity Switches section in the Maintenance
Manual
.
Caution!
Check for sufficient clearance above the vehicle before operating both the arms and forks.