Regarding this manual
TP
+
en-2
2022-D036009
Revision: 03
1
Regarding this manual
The original instructions were prepared in German; all other language versions are translations of
these instructions.
If this manual is supplied with an amendment (e.g. for special applications), then the information in
the amendment is valid. Contradictory specifications in this manual thereby become obsolete.
1.1
Information symbols
The following information symbols are used:
Indicates an action to be performed
Indicates the results of an action
Provides additional information on handling
2
General safety instructions
2.1
Identification plate
The type plate is attached to the gearhead housing as well input flange.
2.2
Intended use
The gearhead serves to convert torques and speeds in industrial applications.
The gearhead may not be operated in areas with explosion hazards. In food processing, the
gearhead may be used only next to or under the foodstuff area.
2.3
Reasonably predictable misuse
Any usage that exceeds the maximum permitted speeds, torques and temperature is considered a
misuse and is therefore prohibited.
2.4
Guarantee and liability
Guarantee and liability claims are excluded for personal injury and material damage in case of
- Ignoring the information on transport and storage
- Improper use (misuse)
- Improper or neglected maintenance and repair
- Improper assembly / disassembly or improper operation (e.g. test run without secure
attachment)
- Operation of the gearhead when safety devices and equipment are defective
- Operation of the gearhead without lubricant
- Operation of a heavily soiled gearhead
- Modifications or reconstructions that have been carried out without the approval of
WITTENSTEIN alpha GmbH
Designation
A
Ordering code (see Chapter 3.14
B
Ratio
C
Serial number
D
Lubricant
E
Production date
Tbl-1: Identification plate (template)
WITTENSTEIN alpha GmbH - Walter-Wittenstein-Str.1 - 97999 Igersheim
XX XXXX-XX-XXXXX-XX
SN: 1234567
DMF: 05/12
Lubricant
Made in Germany
i = XX
A
B
C D
E
