Wittco 1826-13-HMD, Руководство по установке и эксплуатации

Страница: 6 / 12

HMD SERIES F-41142 (10-09)
5
receptacle is not the proper
grounding type, contact an
electrician. DO NOT REMOVE THE
GROUNDING PRONG FROM THIS
PLUG.
Verify that the power
source matches the Serial Data Plate
located on the lower back corner of
the cabinet and the plug
configuration before the connection
is made. (
Fig.1)
Do not store or use
gasoline or other flammable vapors
or liquids in the vicinity of this or any
other appliance.
(Fig.3)
(Fig. 3)
LOCKOUT / TAGOUT PROCEDURE
PLEASE NOTE:
It is recommended that prior to placing the cabinet in operation that it be
preheated at the highest temperature setting for a period of 30 to 45 minutes.

WARNING
FAILURE TO COMPLY WITH THIS PROCEDURE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH.
Always perform the LOCKOUT / TAGOUT
PROCEDURE before removing any sheet metal panels or
attempting to service this equipment.
The Lockout / Tagout Procedure is used to protect personnel working
on an electrical appliance. Before performing any type of maintenance or service on an
electrically operated appliance, follow these steps:
1.
In electrical box, place unit’s circuit breaker into OFF position.
2. Place a lock or other device on electrical box cover to prevent someone from
placing circuit breaker ON.
3. Place a tag on electrical box cover to indicate that unit has been disconnected for
service and power should not be restored until tag is removed by maintenance
personnel.
4. Disconnect unit power cord from electrical outlet.
5. Place a tag on cord to indicate that unit has been disconnected for service and
power should not be restored until tag is removed by maintenance personnel.