Witt E-900 Gent, Руководство пользователя

Страница: 21 / 32

21
eBike settings
* Note: The images are for guidance only and may vary from the physical product
Tighten the guide fittings by tightening the Allen key.
Tighten the bolts according to the drawings and be sure to follow the order:
1-2-3. The required torque for screws and bolts is 14 Nm.
Place the handlebar at a suitable height/position and tighten the bolt.
Make sure that the minimum mark on the stem is not visible.
Place cables and wires in the cable holder.
* Note: The images are for guidance only and may vary from the physical product
Adjust the saddle and seat post as shown in the picture to ensure a
comfortable and safe driving position. Make sure the saddle is securely
fastened before driving.
1. Press and hold the on/off button for approx. three seconds to turn on the
battery.
2. Select the assist level using the up or down the arrow or the +/- keys.
Now you are ready to go.