Sensoric
Sensoric GmbH Berlin © www.witt-sensoric.de
7
Sensoric
Receiver
Excess gain
less than 2
Green LED flashing
Excess gain
greater
than 2
Flash frequency of red
LED increases with signal
reserve
Alignment mode
Alignment mode is accessed by activating test or alignment mode for at least 15s and for the
duration of alignment.
Rotating the transmitter and receiver increases or reduces the reception level. The more the
level increases, the faster the flash frequency of the red LED will be.
When the maximum flash frequency is reached, the light curtain is optimally aligned and can
be fastened in place.
For PNP or NPN output versions, the test input must now be disconnected from the fixed
potential again and connected to the test input of the controller.
The test input (T00 version) is only required for alignment when using the OSE output ver-
sions. Connect to 0V/GND in normal operation.
Transmitter
Alignment mode
(LEDs flashing alternately)
Legend
LED lit
LED flashing
LED off
green
yellow red
Transmitter
Receiver