EN - 19
Withings Aura Smart Sleep System
v1.1 | September 20th, 2014
Configuring the Aura Bedside Device and Sleep Sensor in the
Health Mate App
Prerequisite :
• A Withings user account is required to install the Bedside Device and the Sleep Sensor.
If a user account is not registered in the Withings Health Mate App, the app will prompt you
to create one automatically. Refer to “Creating a new user using the Health Mate App” on
page 23.
During the configuration, the Withings Health Mate App will ensure that the Bedside Device
and the Sleep Sensor are upgraded to the last firmware version. This step might takes few
minutes.
fig - 25
fig - 26
fig - 27
Configure Aura Sleep Sensor
During the configuration, the Aura calibrates the sleep sensor. This step may take up to
ten minutes. During the these 10 minutes the Sleep Sensor emits a low audible sound and
illuminates a LED.
Note :
Do not sit on the bed while the LED is ON.
The LED switches off to indicate that you can now use the product.
