EN - 13
Withings Aura Smart Sleep System
v1.1 | September 20th, 2014
2. Connect the Sleep Sensor’s USB plug (1C) to the one of
the USB ports (2B) on the Bedside Device.
Only use USB ports (2B) for plugging in the Sleep
Sensor. Do not use USB port (2C).
3. Connect the AC power adapter (3) to the power jack (2A)
on the Bedside Device.
4. Select the correct plug adapter from the travel adapter
plug set : (3A) for European Union countries, (3B) for
the United Kingdom and (3C) for the United States of
America.
5. Follow the arrow in “fig - 10” to connect the plug adapter
to the AC power adapter using the blue matching dots.
6. Push the lower side of the plug adapter down until a click
sound is heard.
7. Ensure that the plug adapter is properly seated into the
AC power adapter slot.
8. If the plug adapter is not properly seated, pull down
the release button to disengage the plug adapter, and
connect it again
9. Plug the AC power adapter to a power outlet.
10. The Aura will start up and the startup indicator will turn
ON, as in “fig - 04” on page 12. The startup indicator
will turn off and the clock display will turn on when the
startup is complete.
(1C)
(2)
(2B) (2C)
(2A)
(2F)
(2E)
(2D)
(3A)
(3B)
(3C)
(3)
(3A)
(3B)
(3C)
(3)
(3A)
(3B)
(3)
fig - 07
fig - 08
fig - 09
fig - 10
fig - 11
