WITA go.future LCD 40 Series, Перевод оригинальных инструкций по установке и эксплуатации

Страница: 26 / 40

Operating instrutions
WITA go.future LCD 40-XX | 60-XX
bear no liability for any consequences resulting from the use of
other parts.
2.9 Unpermitted operation
If the pump is disconnected from the power supply, wait at
least 1 minute before reactivating. Otherwise, the pump's
inrush current limit has no effect, which can lead to functional
errors or damage to any connected heating controller.
The pump's operational safety can only be ensured
if it is used as intended. Please observe section 4 of
these operating instructions here.
Ensure compliance with the limit values detailed in the
technical data.
3 Transport and Storage
After receiving the product, inspect it immediately for damage caused in transport.
Should you detect any transport damage, assert a claim with the haulier.
Incorrect transport and storage can lead to personal injury or damage to the product.
• Protect the product against frost, moisture and
damage during transport and storage.
• Only carry the pump by the pump housing,
and never by the connection cable or terminal box.
• If the packaging weakens due to moisture, this can
lead to the pump falling out and causing severe injury.
26