- 9 -
9.4
To lock the battery into the bike frame turn the key clockwise the locking bolt
holds the battery, if you wan to unlock turn the key anti clockwise while the key
at lock position. Read 3 and 4 for battery care and advice on charging at the
beginning of this manual.
9.5
The battery can be charged either on or off the bike.
9.6
To remove the battery first turn off the power by switching the on/off button.
Unlock the battery and pull out from the rear carrier housing.
On the handle bars
10 The battery capacity box
10.1
When the battery is switched on the lights on the capacity indicator on the
handle bars will illuminate showing the battery capacity available. When the
battery is switched off the lights will go out and you will not get any assistance
from the battery or motor. The bike is then an unpowered push bike.
11 Gear shifters
11.1
806fe has 16 gears, 2 front chain drives (34 and 50
teeth) and 8 rear sprockets (11 to 30 teeth). The
front shifter will move the chain between the high
gear chain drive
H
and the low
L
. (Please refer to
the picture). The rear shifter will move the chain
from the highest gear to the lowest by simply moving the lever from left to
right.
12 Pedelec mode
12.1
When you first ride your Wisper bike you will notice that after one turn of the
pedals the motor will start working assisting you ride the bike by adding power
to the front wheel. This is the standard or pedelec mode, to continue using the
pedelec mode you must keep turning the pedals, if you stop the motor will stop
and the bike will slow to a halt. If you start pedaling again after one turn the
motor will start again.
13 Throttle
13.1
No throttle is available in this bike.
