33
8
Check alignment and clearance of pedelec sensor
Adjust if necessary (see
manual)
9
Remove triangular cover beneath battery cradle and
check security of all plugs and sockets.
Check motor cable cannot rub
against the tyre
10
Charge battery off the bike for 12 hours and check
charger and battery functions correctly
Check status lights on charger
and battery LEDs during and
after charging. Advise customer
to complete one more 12 hour
charge.
Road Test
1
Road test the bike in a safe environment to test
functionality of both electrical and cycle systems as
described in the user manual, and check noise and
performance levels
Adjust / correct after test ride.
2
Notify Wisper Support if any manufacturing faults are
identified quoting details on the QA label and
providing photographs if possible of any faulty
components.
Print out and Sign off the above
check list and pass to customer
along with the QA label
attached to the bike
3
Run through the bike operation, battery charging and
storage instructions and offer safety advice to the
customer
Name of inspector and dealership …………………………………….
Signed on behalf of the dealer ………………………………………….
The 300 mile service and any subsequent service should generally follow the above check list with
particular emphasis place on re tensioning of spokes at the 300 mile service to ensure compliance
with the Wisper warranty.
Copyright January 2013 Wisper Ltd
