14
C: Down (decrease) adjustment button. For decreasing the level of assistance.
D: Set. When pressed, you can switch the bike lights on and off and set the single trip distance. If you
press it together with C button, you can set the bike’s tyre size.
E: This shows the instantaneous power consumption. A longer bar means the motor’s power output
is higher.
F: Battery capacity. The bars indicate the charge capacity (level) of the battery. Each bar
approximates to 25% capacity remaining.
G: Instantaneous speed figures.
H: Pedelec assistance strength levels.
I: Total riding distance since last reset.
3.2.2
When the ON/OFF button is pushed and held for 3 seconds and the capacity indicator goes
out you have turned the bike “off”. When the bike is “off” you will not get any assistance from the
battery and motor and the bike is effectively simply an unpowered push bike. To turn the power
back on so the pedelec and throttle work again simply press the ON/OFF button once, the capacity
indicator will illuminate showing the power is on.
3.2.3
How to adjust functions:
3.2.3.1 To adjust the pedal assistance. Refer to paragraphs 3.4 below.
3.2.3.2 To turn on the bike front and rear light press the “set” button once. You will see a light
symbol added under the battery capacity indicator, then press the “up arrow” to turn the
lights on and the down arrow to turn the lights off. This also turns the display backlight on and off.
3.2.3.3 To read the single trip distance press the “set” button twice; you will see a
symbol in
the left side of the screen. Press the down arrow to clear the value.
