WISKA SW 200, Руководство по эксплуатации

Страница: 4 / 16

30101271000_SW200-SW200A Rev 24022012E Safety
4
2. Safety
The following safety instructions have to be strictly followed! Otherwise you put yourself
and others in danger.
2.1 General information
Intended use
The SW 200/ SW200A searchlight is designed for lighting large and far away objects.
The range of the searchlight is up to 848 m.
Because of its intense light power the searchlight may not be used to illuminate persons
in the nearby surroundings.
It is not suitable for illuminating, spaces on the ship or in buildings.
Danger! Unauthorised conversions and changes to the searchlight are not
allowed, since this can endanger persons and may damage the unit. Disregard
will result in the loss of the operating licence and warranty for the device. Only
original spare parts may be used.
Risk of getting burned! Never touch the searchlight during operation without
protection. The casing can reach 140 °C. Always allow the searchlight to cool
down before maintenance and repair work. In case of burns cool the injured
area immediately and seek medical help.
Risk of glare! Never look into the light source during operation. This is
dangerous for the eyes. Never point the searchlight directly at anyone.
Risk of crushing! Risk of shearing! Before rotating or tilting the searchlight
using the optional remote control: Make sure that there is nobody right beside it.
A persons limbs can get trapped between the searchlight and the moving
mechanism and sustain serious injured.
2.2 How to handle halogen lamps
Strictly follow the safety instructions below when handling halogen lamps:
Transport
• Always store and transport halogen lamps in such a way that the glass bulb
cannot break.
• Leave the lamp in its packing until it will be used.
• Use the packing when transporting the lamp.
• Never touch the lamp with your fingers.
Operation
• Check the lamp before installation for fingerprints and dirt. Remove
fingerprints on the lamp before installation with an alcohol solution and a soft
lint-free cloth.
• Use disposable gloves when handling the lamp. Every fingerprint or other
contamination on the glass bulb of the lamp greatly reduces its lifetime.
• Check the lamp for scratches, cracks or other damage. Don’t continue using
damaged lamps.